 |
We bought a low beam
GE headlight from Walmart ($6.)
Spread the prongs out
We got bulk length of 16 gauge
wiring, split & wired to prongs
Solder the connections
Silicone over the solder & let set
|
 |
 |
We opened up the back of the box
the light came in and made
a small hole in the opposite
side to feed the cord through.
Pour in the cement
and then place the light down into the box squishing it into the cement.
Let it cure for approx. 5 days.
Remove from box and slather the cement, and where cement meets the glass, with silicone. Let set.
It's ready to wire into your transformer!
|
 |
|
  visit:
www.koiphen.com
|
|